Xtreme Skyflyer, known as RipCord at Carowinds,
On February 8, 2024, it was announced that Xtreme Skyflyer would permanently shut down at Canada's Wonderland to make way for future park expansion.
Ride description
Structure
Xtreme Skyflyer's structure consists of several main elements, including an arch where the cables holding the riders are attached to. There are also two towers which hold the lift cables. Riders are lifted to the top of either tower and then can release by pulling a cable release. The ride also utilizes a scissor lift, which raises and lowers to assist riders with loading and unloading from the cable harness.
Summary
Riders first step onto a scissor lift, where they are raised into loading position. Operators on the platform hook riders onto a cable that is directly connected to the arch above. Another cable is connected to one of the two rear towers. After the loading platform retracts, riders are raised up to the top of one tower, and then one rider is assigned the task of pulling the ripcord, which releases the tower cable's connection and begins the free-fall. Riders experience a brief moment of freefall before entering a swinging motion. After swinging back and forth for a short time, a ride operator will raise a cable loop attached to a metal pole for one rider to grab onto, helping to bring the swinging motion to a stop and positioning the riders back over the scissor lift platform. The previous riders are unloaded as any new riders waiting to ride are attached.
Prior to the ripcord being pulled, an operator will usually state the tower number and give instructions to pull the cord by saying, "Tower one (or two). 3, 2, 1, fly." One complete cycle can last anywhere from 3 to 5 minutes.
